Skip to main content

Aluminum Coil

Recrystallization, recovery and homogenization annealing are performed according to the usage area of the final product. As a result of homogeneous annealing, deep drawn products can be produced.

Classic embossing or diamond patterned embossing pattern can be applied to products up to 0.30 mm – 1.75 mm thickness and 1500 mm width according to customer request.

Depending on the customer’s request, the surface can be completely oil-free, low-fat or oily.

Thin Slitting

Products with thicknesses between 0.18 mm – 1.50 mm can be Decoded up to 20 mm wide.

Thick Slitting

Rolls with a thickness of 1.00 mm – 6.00 mm can be Decanted up to a width of 200 mm. Depending on the customer’s request, foil can also be coated.

In our aluminum length cutting machine in roll form, it is possible to cut sheet plates up to 6000 mm paint in line with customer demands by passing through the plane group rollers. According to the request of our customers, foil-coated or paper-Decked sheet cutting is made.

With our test devices such as spectrometer, tensile tester, sample heat treatment oven, viscosity device, the production process is controlled from the melting of the raw material to the packaging stage. Our products comply with AA, EN and ASTM norms.

Packaging is carried out with waterproof wooden pallets in accordance with international packaging standards. A test certificate is available on all our packages.

Alüminyum Rulo Bursa Üreticisi Kalıpsan