With our aluminum plate and coil supply, we provide services to many sectors, especially construction, automotive, white goods, defense industry and technology sectors.

1XXX, 3XXX, 5XXX, 8XXX series alloys can be cast up to 1600mm width.

Rolling of flat and flat products up to 1600mm wide is carried out.

Our fortified products;

• Classic 5 bar cheetah
• Diamond cheta
• Duet çeta

Our products can be rolled with automatic thickness control in the final thickness range of 6.00 mm – 0.18 mm in line with customer demands. The pressing force in our cold rolling mill is 1800 tons.

According to the usage area of ​​the final product, recrystallization, recovery and homogenization annealing are carried out. Deep drawn products can be produced as a result of homogeneous annealing.

Classic embossing or diamond embossed pattern can be applied to products up to 0.30 mm – 1.75 mm thickness and 1500 mm width, according to customer request.

According to the customer’s request, the surface can be completely oil-free, low-oil or oily.

Thin Slitting

Products with thicknesses between 0.18 mm – 1.50 mm can be sliced ​​up to 20 mm width.

Thick Slitting

Rolls with thicknesses between 1.00 mm – 6.00 mm can be slit up to 200 mm width. Depending on the customer’s request, it can also be covered with foil.

Aluminum in the form of rolls can be cut in sheets up to 6000 mm in length in line with customer demands by passing through the smoothing group rollers in our length cutting machine. According to the request of our customers, foil-coated or inter-papered sheet plates are cut.

With our test devices such as spectrometer, tensile testing device, sample heat treatment furnace, viscosity device, the production process is controlled from the melting of the raw material to the packaging stage. Our products comply with AA, EN and ASTM norms.

In accordance with international packaging standards, packaging is made with waterproof wooden pallets. All our packages have a test certificate.